I have a fun new project that is pretty easy and fairly inexpensive. I love to rummage through the IKEA “as is” section just to see what treasures I may find. Sometimes I find great linens with cute patterns to use as fabric. Other times it’s a slightly damaged picture frame that can either be repaired or painted. In this case, I came across their cabinet doors. They are all random shapes and sizes and usually are only a few bucks. I found a cute long skinny one I wanted to use to make this project:
The cabinet door I chose was 1.99. I don’t have pictures for step by step directions but the directions are pretty self explanatory so I will list them in order and if you have any questions let me know!
1. The first thing I did was clean it. Obviously it’s a good idea to clean the object before painting it.
2. I used a dark brown flat paint to sort of “prime” the piece. The main reason I did this though was to create a dark layer under the white paint to show through when I distressed it.
3. After that dried I used vaseline in the areas I wanted to distress.
4. I sprayed a white satin spray paint over the entire piece and let that dry.
5. Then I rubbed off the vaseline areas with a paper towel once the white paint had completely dried, to reveal the distressed areas.
6. There will already be a hole drilled in the cabinet for some hardware, so all you have to do is find a knob you love to add to it. I love the knobs at Hobby Lobby, and they are ALWAYS on sale, so I found one that looked like a mini antique door knob. I think it ended up being about $3? They also have adorable crystal knobs too. I would just take a look and try not to be overwhelmed!
7. Finally, to get the text on, I opened a document in Illustrator that was the same size as the top and bottom panels of the door. My panels were 2″ x 6″. I’m sure you could use a word processing program as well. Or you could draw a rectangle in any program the size of the top and bottom panel just to give you a reference, then select the type size and style to fit within the panels. The dimensions just help you choose the right size of text so that it fits perfectly on your door.
8. Print this text out and hold the paper up to a window and flip the paper over so you can see the text through the paper. Then you want to take a pencil and lead the entire back of the text. This is a similar method to when I did the chalkboard clock, only you’re using lead instead of chalk.
9. Flip the paper back over to the correct side and center the paper and text onto the panels and secure the paper in place with some tape so it doesn’t slip. Then you want to carefully trace all the letters onto the top and bottom panels. You can use a pen or pencil for this.
10. Once you remove the sheet of paper you’ll see the traced lettering onto the door.
11. You want to use a thin paint pen (color of your choice) to go over and fill in the letters.
12. You can add some sort of hanging hardware on the back if you want it to hang on the wall, or it looks good on a shelf just resting as well. I will say though, that if you decide to hang it on the wall, you’ll need to cut off some of the screw in the back to help it lay flush with the wall.
And there you go! I hope the directions made sense. I have been busy working on my Etsy shop to raise funds for our adoption so some of the projects I post may not always have pictures to accompany every project but I will try to do better!
And if you are a) too busy to make any of the future posted projects or b) want to support our adoption fund, visit my Etsy shop at: https://www.etsy.com/shop/PinkPoppyPress and you will be able to purchase most of the items I blog about here from now on. I would be eternally grateful! All profits will go toward us getting our little girl home!